0% Shrinkage RTV Liquid Jewelry Molding Rubber Ordinary low-cost RTV liquid rubber...
Further videos can be found on our videos page.
Safely molds just about anything without shrinkage!
Castaldo® LiquaCast® is a 0% shrinkage room temperature vulcanizing liquid rubber that lets you make molds of delicate objects that would not survive the heat and pressure of the normal vulcanization process.
Typical uses include making molds of CAD-CAM, RP and SLA resin models, wax carvings and wax injections. Also possible are objects from nature — leaves, plants, flowers, fruit, insects – anything!
Easy to Pour.
Castaldo® LiquaCast® is an easy-flowing two-part liquid room temperature vulcanizing compound that makes tough, strong, flexible rubber molds in 18 hours at normal temperatures. It can be cured in as little as 90 minutes at temperatures up to 66° C./ 150° F.
Unlike traditional silicone liquid molding rubbers, LiquaCast is easy to pour, easy to mix and easy to vacuum de-bubble because of its low viscosity.
LiquaCast produces superior molds but costs only a fraction of the price you may be accustomed to paying for traditional RTV compounds.
Stronger, Tougher Molds.
Molds made of LiquaCast are much stronger, tougher and longer lasting than those made from traditional liquid rubber compounds. LiquaCast molds are production molds that can be used 100’s of times, not intermediary or prototype molds that can be used only once or twice.
Typical Uses Include:
- CAD-CAM, RP and SLA resin models
- Wax carvings and wax injections.
- Objects from nature such as leaves, plants, flowers, fruit, insects
Rapid molds from rapid prototypes with finished molds in as Little as...
Injecting Castaldo LiquaGlass molds is easy because you can see the wax...
LiquaSil Clear is a transparent two part 0% shrinkage, 1:1 mix ratio...
LiquaSil Clear is a transparent two part 0% shrinkage, 10:1 mix ratio...