1. |
Mold Making - Fact Sheet and Technical Bulletin   |
2. |
Mold Making - Guide to Solving Common Mold Making Problems |
3. |
The Castaldo Moldmatic® System |
4. |
Silicone Molding Rubber  |
5. |
VLT® Silicone Molding Rubber |
6. |
Jewelry Molds Using VLT® Rubber Jewelry Prototyping Process
(Reproduced with permission of Objet.) |
7. |
VLT® article on the topic of direct casting from Cad/Cam models.
"2004 AJM INNOVATION AWARD WINNER The wait IS over!!!!" by John Shanahan
from the August 2005 issue of AJM. The Italian
version was translated by and
published in Oromacchine for 2006.  |
8. |
Castaldo Quick-Sil®  |
9. |
No Shrink Pink®  |
10. |
Wax Injection Problems and Solutions |
11. |
Castaldo LiquaCast® Liquid Molding Rubber |
12. |
Castaldo LiquaCast Ultra® Liquid Molding Rubber |
13. |
Castaldo LiquaGlass® Liquid Molding Rubber |
14. |
How to Make Rubber Jewelry Molds by Larry Kallenburg |
15. |
Making Silicone Rubber Molds by Ken Sanders |
16. |
An Easy and Inexpensive Way to Make Jewelry Molds at Home |
17. |
How to Duplicate Your Jewelry  |
18. |
Jewelers with Spunk Beat Out the Spelunker |
19. |
Some Advice: How to Cut & Use Rubber Jewelry Molds by
Peter W. Rowe |
20. |
Cutting Air Release Vents (Airing Out Our Differences) by Bernard Reller.
Originally published in MJSA Journal, the monthly magazine of Manufacturing Jewelers & Suppliers
of America, mjsa.org. |
21. |
Making molds Part 1 by Donna E. Shimazu
Making molds Part 2 by Donna E. Shimazu
(Reproduced with permission of the publisher of Lapidary Journal, January and February, 2007,
Volume 60, Nos. 10 and 11.) http://www.lapidaryjournal.com |
22. |
How to Make Vulcanized Rubber Molds by John Donivan.
Reproduced with the permission of John Donivan of Donivan and Maggiora,
manufacturing jewelers of San Francisco http://www.donivanandmaggiora.com |
23. |
A series of articles on mold making by Steve Inlow
republished here by permission of the publisher of Jewelers Inc. and the author, Steven Inlow. (below) |
| |
Making Mold with VLT Rubber (Castaldo VLT Mold Rubber) by Steve Inlow.
This article originally appeared in the September 2007 issue of http://www.jewelersincmagazine.com. |
| |
Packing a Rubber Mold by Steve Inlow.
This article originally appeared in the January 2009 issue of http://www.jewelrsincmagazine.com.
|
| |
Cutting a Rubber Mold by Steve Inlow.
This article originally appeared in the February 2009 issue of http://www.jewelrsincmagazine.com. |
24. |
How to make molds without using a knife. The Powder / Cream Separation Technique and the use of Mold Lock formers. |
25. |
The Art of Mold Making by Suzanne Wade
Originally published in MJSA Journal, the monthly magazine of Manufacturing Jewelers & Suppliers of America, mjsa.org. |
